39739
I see that you got your answer. I hope you figure it out and have much success with it!
17126
132773
16434So now Chris has explained & u can do it. That's what we r here for to help one another *
1 comment
145791http://www.embroiderystartup.com/...;br />
Truesizer makes it easy. Just click edit and use the flip icon. Nanc
1 comment
6155I have an Elna, and if I go to "edit" I can turn the design around to face the other way.
1 comment
15907I own 4 machines that all have the possibility to embroider a mirror image, even the cheapest (or should I say less expensive), a Brother 190D. I am surprised your machine does not have that feature. Do you have any software? I am sure every brand incorporates mirroring, horizontally as well as vertically.
1 comment
by moyed
11 Jan 2010
Mmmm. The button is there. Did not know about it, do now and will make good use of it.Thank you
145305perhaps it's possible to mirror the image on your PC or in your machine.I have that option on my brother machine and I use PE design software you can shange in there too. hope you can also.
1 comment
by moyed
11 Jan 2010
I use sewwhatpro but have not found out if it will mirror, yep my brother will I just neede a hint as to what button to use. Thank you
743327Hey Moyed, my Brother and my daughter's Singer also have this feature that allows you to rotate the design, you got good advice from Penni so hope this works.
1 comment
45070Hi Moyed, on my machine I have an option of changing from side to side or top to bottom it is usually located somewhere on the embroidery machine. I have the Husqvarna Designer 1 Limited Edition and my little icons are situated on the right hand side of the picture. I've taken a picture to show you where mine is situated. I am currently doing a Tiger from the Sue Box designs and if you look at the right of the screen you can see 4 little icons one has an up and down shaped diamond and the other has a left and right shaped diamond. They are situated underneath the oval shaped icon with the number 0.0 and just above the little circle with a square box and the other one with 3 boxes in it. I hope this is of some help to you.
If not, I am sure someone will come along who can help.
If you could put in the design of your machine that would help greatly.
Love and blessings Chris
8 comments
by moyed
10 Jan 2010
I have brother 1200 and thank you I have found the buttons to change the design. Thank you very much...
by claudenicolas
10 Jan 2010
Thank you pennifold, you explain to make the mirror picture on the screen of the machine, is it possible to have the picture mirror with the 3D Studio, to allow to have the 2 pictures, the first and the mirror on the same design?
by kazza
10 Jan 2010
Yes it can be done in 3D Studio very easily - select the item on the screen and you will see a little arrow head on the side - just click on it and it's reversed
by pennifold
11 Jan 2010
Sorry Claude, just read your question. Yes it is possible to mirror a second picture and have it done in the same hooping. E.g. 2 tigers, one facing say to the right and one facing to the left. As "Kazza" has said you just click on the little arrowhead shaped icon on the design and it will immediately reverse the design. Good luck love and blessings Chris
by clawton
11 Jan 2010
You did a great job explainging that. Looks like you have a Viking SE. I love mine!
by clawton
11 Jan 2010
Opps! Just re-read and you have the Designer 1. Doesn't look like they are going to make either models any longer.
234507