I was inspired by toogie to make this little hanger pouch for the keys to my gun safe. I only had a red zipper and the seams were a little messy but it’ll be inside a shirt so ¯\_(ツ)_/¯. I just got a buttonholer for my old machine and wanted to
(Updated with toaster cover!) The mixer cover is done! Im gonna send it to my mom for mothers day, maybe with the toaster cover in the pattern too Update: I made the toaster cover too and it fits over my 99 :P
Finally started on the quilt using that panel I posted a while ago. I put two borders around it and now have to make the blocks that go on the top and bottom.
Ugh, cleaning the old machine. <br /><br /> The presser foot on my Singer 99 was lowering really slowly so I've taken out the presser bar and it's soaking in kerosene (nasty nasty stuff) to scrub later. I also cleaned the holes it goes through. I'm
I’m sewing a rooster shaped mixer cover for my mom. There’s batting on most of the pieces so Smokey thought the stack of them was a good place to nap. And I got to use the old Singer machine on a project for the first time cause my Brother was missing
I return, with a new machine I'm planning on getting back to my hobbies and i just bought a new sewing machine! A Singer 99-13 made in 1934. It didn't actually work when I got it (no belt and the motor makes an angry noise instead of spinning) so I t
How do you make fsl with metallic thread? I turned the machine down all the way and changed to a metallic needle but it still wouldn't stop shredding
I did a thing today with black cutaway and theres a black mark on the bed of the machine. I tried water and then a little soap with the water but it wont come off.
Anybody have experience with these cutting needles? They "sew" along the outline of where you need a cutout, but without thread, and theyre like chisels and cut the fabric. Im not really planning on getting them because i do fine with scissors, but i
Do you pull up your threads at the beginning? Like pulling the bobbin thread up to the top and let the machine go a few stitches then trim both of the threads.
I got my machine back! Next time i feel like driving out there i have a buy one get one coupon fir madeira thread. The test embroidery was a big cool looking skull. I looked and the tension is set to -3? So thats weird. They also actually fixed the bur by
I haven't been on here in a while cause there's been school stuff to do, and I think I talked about it on here before, but my machine wasn't fixed by the repair people back in september, so it's been packed up in its rolly bag ready to be taken to the
My machine is running a lot quieter now so thats all good, but it periodically loops on the underside of the fabric. It doesnt really affect the design, but obviously its still not a good thing, especially with fsl because it shows. I havent had time to g
ah man, cat problems rant or whatever... So, Smokey was an indoor only cat until he was like 2, then at our next house we lived at about a year i allowed him on the roof through my window a lot and in the back yard a couple times. The next house we li
Making the hoop move quieter Is one of those slippery things you stick on the machine for quilting the way to go? Im scared of how loud my neighbors can hear through the apartment walls so ive had the machine running at 350 but the stupid hoop rubbing
