41✽
Hi all, first time in here so here goes, when I've finished an embroidery piece and take it out of the hoop it doesn't lay straight even when I iron it, what can I do to overcome this problem,June
Comments (22)
20661✽
What kind of stablizer did you use? Did you have your material tight in the hoop? Either of these could be the problem.
6982✽
Just want to say Welcome! You will find this a friendly and helpful place. But just a friendly warning --- it is VERY addictive. (very big grin!) Glad to have you here
4554✽
Welsome jlfussy I agree with kttyhwk, her suggestion are usually the most common causes, you can try using a couple of layers of stabilzer, also make sure material is at least a couple of inches larger than your. You can also wind a binding around the rim of the bottom part of your hoop which helps to stop your fabric from slipping
42046✽
46153✽
27382✽
Welcome, June. You have had some good suggestions. What type of fabric and stabilizer did you use? It is always a good idea to use 2 layers of stabilizer.I always use tear-away. Sometimes you might have to slip a 3rd piece under the hoop. Hoop your fabric firm but NOT drum tight.The other reason could be the design is to dense or your threads are inferior. I have found cheap threads are not worth it. I do not like QA threads very much.Ricky.
6653✽
OK, this sounds like a hooping issue. You may have stretched your fabric when you hooped it, so it will pucker or be distorted (similar to what happens when you sew elastic onto an item). It could also be that you didn't hoop the item on grain. It doesn't always happen, but if you hoop your fabric off grain, the stresses of the stitching can warp the threads of the fabric and it will not lay flat anymore. If you don't stabilize enough, that might also lead to your fabric stretching while stitching and that can leave gaps in the stitching or else cause it to be "wavy" when unhooped. I hope one of these ideas can help you to resolve your issues. =]
2796✽
Hi and welcome. I also thought it could be a tension problem - maybe the bottom tension is too tight, justa thought - *4U
211079✽
by
shirlener88
03 Jul 2008
+5✽
June, welcome to the 'CUTE' family - I feel you have your answer within. Here is a flower for you - now you have ten.
1 comment
Shirlene love your flower . Nancy
28916✽
158718✽
145791✽
Hello and welcome to the cute fmly fussy U have some excellent answers here from the pros & I hope they solve your problem. We r most proud to have you in our community *4U now U have 16
18167✽
63126✽
2577✽
Have you done it on the worp or weft or bias of the fabric, if will stretch more. Always put on sometype of backing as said. I dampen things and press on the back. IF not throw it out and do keep trying again, it will work!!!Welcome.
27071✽
You have a lot of very good answers, believe me the "Cutes" know what they are talking about, very very smart bunch...Welcome, enjoy !!!
44905✽
by
dlonnahawkins
03 Jul 2008
+4✽
Welcome to Cute - you got answers you needed, I feel. This is a great site to get answers to embroidery questions.
145305✽
Welcome to Cute. As you see, every one is willing to help here. Flower to welcome you.
1496✽
welcone. I am glad you asked your question. I found lots of answers I did not know either. :) thanks and hope to see you back again.
22886✽
by
shirleysisson
03 Jul 2008
+3✽
Welcome to the 'Cute' family, June. I hope that you have found an answer to your problem from all the response you got here. *4U
16513✽
June Welcome to the Cute Family. Looks like you have good answers so I will just give you a flower and say hope you visit often.
62461✽