Community / Embroidery /
109788
by toogie 09 Dec 2019 ( edited Dec 11'19 00:32 )
+30

Cutie's, when stitching on a blanket and using a design with knock down stitches, do you use same color thread on top and bottom/bobbin? Or does it matter?

Comments (9)
318555
by dragonflyer 09 Dec 2019
+8
To me it is a personal preference... Depending upon the project...but I usually match the color thread of the knockdown stitches to the color of the blanket, and that would include the bobbin thread too...also remember that your stabilizer will be stitched and really cannot be removed unless you use WSS stabilizer and wash it out after the embroidery is done....
4 comments
by toogie 09 Dec 2019
Thanks Kim, I just read your pm. Maybe I will just skip the knockdown altogether...IDK....
by vickiannette 09 Dec 2019
sound like very good advice.
by mrskiki 09 Dec 2019
Why skip the knockdown stitches? I would use the same color as the blanket for KD and bobbin. Also I use WSS for all things like towels and blankets where you want the stabilizer gone. Hugs. Nan
by toogie 09 Dec 2019
I didn't skip them, Nan. Look in Projects. My reason I thought I didn't have enough red thread to do a bobbin too. I also was short on WSS but I made it!
66927
by graceandham 09 Dec 2019
+8
Hi Toogie. I don't have an answer for you, just wanted to wish you and yours a Merry Christmas and Happy Quilts.
1 comment
by toogie 09 Dec 2019
I'm stitching with the knockdown like Kim said to do below. I think it will be fine. Same to you and yours!
109774
by crafter2243 09 Dec 2019
+8
I usually do not do knock down stitches. I use a very fine tulle and stitch over that. It will tear of easily around the design.
4 comments
by toogie 09 Dec 2019
That is good to know Angie. I will have to give it a try. Will it stay in the design, say if you did lettering, so it will continue to keep the pile down?
by Sewmum1 09 Dec 2019
I have used tulle too and it stays in the design. Don't use a really stiff tulle as it can be scratchy along the edges when removed
by toogie 09 Dec 2019
okay thanks
by dragonflyer 09 Dec 2019
Tulle is great if you are not using a patterned knockdown stitch that will also add some dimensional interest to the design...It also depends upon how much "open" space there is in the design...if there is quite a bit, then the tulle will sometimes "poof" up and not be as "invisible" as it might need to be...
12506
by stock 09 Dec 2019
+8
for towels etc. i usually do the design then add a cotton backing with a frame design...wendy
3 comments
by Sewmum1 09 Dec 2019
This is a lovely idea especially for baby blankets
by mrskiki 09 Dec 2019
Great idea! Hugs. Nan
by toogie 09 Dec 2019
That's a good tip, stock, thanks!
5277
by sharonleekesner 09 Dec 2019
+3
I use the same color as the item.
1 comment
by toogie 09 Dec 2019
I did, my first time having a design with them. Look in Projects at the result.
7208
by AuntAnnie 09 Dec 2019
+3
Always. Even when I did a monogram making the back reversed. Just keeps it looking more tidy.
1 comment
by toogie 09 Dec 2019
I thought of that too.
15982
by theduchess 09 Dec 2019
+3
But what are knock down stitches?have never heard of the trerm?
1 comment
by toogie 09 Dec 2019
Look at my pics I just put in Projects. If you click on the picture it should enlarge for you to see them. They are stitches that hold down a fluffy fabric so your design that you want to see won't get buried in the pile/fluff/fleece fabric.
41781
by lilylady 10 Dec 2019
+2
How did you get knock down stitch to match your letters?
158718
by jrob 11 Dec 2019
0
I try to because a blanket is looked at on both sides. If it's a decorative towel that will always be hung I don't.