299559✽
this is more for assistance then to show the embroidery. As you can see this has the plastic back & I only did a simple outline heart. Does anyone have any ideas on what to put on the back that can stay there & then I can do something denser on the front? I posted this in the question spot but I didn't know where to post picture? I'm afraid if I don't pet the right thing on the back anything more will tear the plastic up?
1 images:
[1]
Comments (3)
234507✽
You might be able to put on a thicker stabiliser but make sure when you are pressing it that you don't burn the plastic. I'd use a press cloth. I've done this and used an iron on stabliser. Because the bibs are so flimsy you don't need anything too heavy. Love and blessings Chris
1 comment
I forgot to mention that I did an FSL design and because it wasn't as dense it didn't pull the plastic away from the fabric.
211079✽
by
shirlener88
21 Feb 2011
+5✽
Loralye, I would use several layers of WSS and use the same color bobbin thread as in the top, but without try it out first - I don't know what the outcome would be - especailly after washing it. *4U
299559✽
do you think that the heart design from Christie fsl that I did the other bibs with will work if I put stabilizer on the back?