29801✽
I have downloaded it and converted it to v4 Babylock/Berina/Brother(*PES) with Pulse. I have loaded it onto my machine and it says it has loaded but a design does not appear. Would it be a resizing problem? Lyn
Comments (7)
67271✽
what was the design?
2 comments
http://www.singerco.com/projects/?project_id=464
very nice
67271✽
Lyn, check out this biscornu blog, lots of ideas here, scroll down on the right for freebie charts. These are not ME but cross stitch by hand.
1 links:
[1]
http://basketofbiscornu.blogspot.com/
basketofbiscornu.blogspot.com
2 comments
Bev, When I read your reply. I thought Oh! No! what are you trying to do to me. Don't I have enough-- Ha Ha Ha. Then I noticed they are all hand sewn. I feel better now as I don't have time to do them by hand. Thank you anyhow. Lyn
But weren't they pretty.
1142✽
Lyn, I am not too familiar with PES designs but when I have converted PES designs TO JEF they are not centered correctly in my hoop. Does your conversion software show the design in the hoop? You could check to see if it is centered correctly. I would think that the machine would not recognize it if it was not centered. I hope that works for you.
Kathy
Kathy
1 comment
When I transfer to my machine it tells me how much memory it has taken but the design does not appear. Will try to make it smaller with Wilcom Truesizer. Thank you for your trouble. Lyn
234507✽
Hi Lyn I just downloaded it and had no trouble. I picked the big one and put it in a 5x7 hoop and adjusted it to fit. Love and blessings Chris
1 comment
Chris, what type of machine do you have? I can transfer it to my machine and the machine tells me it has transffered with the amount of memory the design has used but there is no design. Lyn
8431✽
I just downloaded it, shrunk it, converted it, and it loads to my machine. I think it might have ended up too dense though to stitch out nicely though. I will try shortly when I have finished cleaning out my bobbin area :)
2 comments
I used the line art one, shrunk and rotated it to get the block effect and I have it stitching out now but I think it loses too much.
Please tell me how you did all of this. I wondered if it was too big as it is really for a pillow. Lyn Thanks.
211079✽
by
shirlener88
27 Mar 2011
+1✽
I have it downloaded - now - just trying to figure out a way to get it converted to PES.
2 comments
OK - I got it converted - but the single design is too large for your hoop - how would you expect to put four of the together and make them them small enough to put in your 4x4 hoop? I don't think that you can get it that small - but maybe I am not looking at this design right. The smaller one of the two is 5.34 x 5.46 inches w 30863 stitches - then if you make 3 more of them - that makes it really big - then you would have to shrink it down to fit our hoop - I am not sure this will work.
This what I suspected but it didn't seem too large when it loaded into the machine, but as there was no design thought this could be the problem. Lyn
913✽
You simply download a free copy of Wilcom Truesizer and convert any design to your pes.
1 links:
[1]
Convert embroidery formats etc
www.wilcom.com.au
1 comment
Thankyou. Think I will have to give this a try as I really want this design. Lyn