Community / Embroidery /
115778
by asterixsew 20 Jul 2011 ( edited Jul 20'11 17:49 )
+36

Other things have taken my time for a while and in my mind I have carefully planned a piece of work. Usually I just sew and see what happens.

I have bought fabric in the colours I require and planned the embroidery with care. The design from a reputable source (I have sewn other designs in this style with great success) BUT it keeps going wrong. So Cuties just how many times do you try to get something to work before giving up? Its after 1am and I am unpicking again...

Comments (17)
72397
by devon 20 Jul 2011
+8
Sometimes I have to walk away and then go back at it. Don't know if this will help, but it is what I have to do.
DeVon
1 comment
by asterixsew 20 Jul 2011
Thanks DeVon, I walked away yesterday and came back today
158718
by jrob 20 Jul 2011
+8
Write/email the company that you bought the design from. Maybe they have a tip for you or will make it right. I will only stitch one out 2-3 times before I quit. I will do it on different fabric and with different types/amounts of stabilizer. I wish you good luck. I HATE to pick designs out.
17461
by michele921 20 Jul 2011
+7
It all depends on how bad I want the item and if I can figure out another way of doing it. I have started some things and they have not worked out I just set them aside and pull out another day and try again, I guess I never really give up then just put away for a long time LOL
19430
by fannyfurkin 20 Jul 2011
+7
I agree with the others, leave it for a while and when you have more patience try again. Also good advice to contact the company you got the design from.
Alice.
67271
by bevintex 20 Jul 2011
+6
It helps me to go step by step if there are directions included. if i really like the design I'll try until I get it right but may not make it again. It depends on my frustration level I may walk away and come back later.
2 comments
by bevintex 20 Jul 2011
Sometimes it is best to start over if there is a lot of unpicking to do.
by michele921 20 Jul 2011
I have never unpicked any embroidery if it doesnt' come out right I start again.
60484
by mariahail 20 Jul 2011
+4
You never give up, but take a nap and try again...it works for me!!!*****
360671
by noah 20 Jul 2011
+5
i never quit !!!never ever quit !!carolyn
1 comment
by bowlds 20 Jul 2011
Nice new pic!
16302
by justonlyme 20 Jul 2011
+6
I've learned to stitch out the design on something that isn't important first to make sure that there are no quirks. I've learned that the hard way. Keep some scraps handy, and use them to test your design. If I really want it, I'll keep trying until I get it, or change my approach enough to make it work somehow.
Good luck!! I hope it works for you eventually. If the design was purchased and it doesn't stitch out well on anything, I would definitely contact the seller.
29648
by rwalden 20 Jul 2011
+5
Never give up. Walk away from it for a while. It's always been something I've overlooked or done wrong.
12165
by caroldann 20 Jul 2011
+5
Usually when things don't go right for me, it's a sign I've got too many things going on in my head and not paying attention to what and how I'm doing something. I walk away from it, clear my brain, then when I go back everything just falls into place. Hugs...Carol
140717
by spendlove 20 Jul 2011
+4
I'm with Carol on this one. Hope it is better today!
1 comment
by designgirl 20 Jul 2011
I agree, and try it another day.
122864
by meganne 20 Jul 2011
+4
HMMMMM? Being a digitiser I expect "PURCHASED" designs to stitch properly, the first time.

I have never unpicked a design and never will. If it doesn't stitch out properly and I KNOW for sure it is the design, the stitch out and the design will both go in the trash (unless it is something I can fix by editing the design itself.) It all depends how badly I want to use the design.

If there is some other cause then I would try and figure out what it is I need to correct to get the design to stitch out the way it should.

So my first question would be: exactly HOW is the design going wrong???
Being precise with the issues you are having will allow Cuties to give you advice on how to fix the problem.
Hugs n roses, Meganne
17161
by bikermomfl 20 Jul 2011
+3
Twice, once is my error, if it goes wrong again, pitch it, delete it and move on.
9888
by patsy28 20 Jul 2011
+2
Hope everthing works out for you today! I'm too new at this to give any advice. Seems like you have great suggestions from other cuties. They always come to the rescue!!
11271
by pcteddyb 20 Jul 2011
+1
Depends on how bad I want the design. I ALWAYS test stitch everything I do - even from reputable digitizers. I try to do the test stitch with the same (or at least similar) fabric and stabilizer, etc. that I will use for the final stitch-out - that way I know if I have the combination right or not. I have test stitched and it was not quite right, then tested again with a different combination - and for one thing I REALLY wanted I did one more test - and still ended up not using the design (I am pretty sure it was the design not the combination). Other times I have been successful with a different combination and been able to use the design. Good luck on your current "challenge".
33580
by leenova54 20 Jul 2011
+1
Twice the first day, once another day then pitch it and find something else to do. If for sure it isn't you or your machine then contact the seller.
132773
by castelyn 20 Jul 2011
+1
Well I would say I never give up.
If it does not stitch correctly the first time I will check it out in my digitising program and in need, fix it and redo it again. (Or Maybe it was something that I did incorrectly.)
If I've tried it out it means that I want it.
So I will not give up.

Hugs Yvonne