234590✽
O.K. I put in a new needle 75/11 - I used two layers of WSS - I slowed the machine down - I put White Polyester thread in top and in the bobbin.
Guess what, can you still see the stitching line just inside the satin stitch. I'm at a loss as to what to do now!
Any more suggestions?
Love Chris
1 images:
[1]
Comments (9)
6331✽
I had the same problem with some of my FSL designs... Hope some one out here can help us.
L'mari
L'mari
1 comment
I'll try it on the plastic WSS and see if there is a difference. Love Chris
360672✽
yep heave it as far as you can and try some from Yoshiko's site hers were perfect:):) hugs Carolyn
1 comment
I had a look at Yoriko's and the do look nice. Thanks Carolyn love Chris
44906✽
by
dlonnahawkins
03 Sep 2011
+11✽
I have had things like this happen, and I actually went and did a wider satin stitch around the edge - but that is tricky. I don't know who's design this is, but I would send a note and attach the copy. I think that they may need to take a look at it, and adjusts their design.
89895✽
It's obvious now on this stitch out before you remove the WSS that the outline stitch was incorrectly placed when it was digitized. It is a hassle but I would let them know about this design flaw and maybe they will refund or give you a credit to use on another design.
1 comment
I'm glad that you can see that too Capoodle. I'm going to try it out on the plastic WSS and see if there is a difference. Love Chris
24826✽
by
mranderson
03 Sep 2011
+8✽
Chris, I have some of that rubbery matting that you can buy from the cheap shops and have cut it to fit my hoop then I put it under the top of the hoop to hold the WSS from slipping. Maybe that is worth a try. Hugs Marg
2 comments
I eventually found this design and have stitched it out and posted here in projects.
Thanks Margaret - it looks great and like what I expected it to. Love Chris
255068✽
I think it looks great Chris.
1 comment
Thanks Sarah - of course no-one but me would notice it - but that's me! LOL! Love Chris
7969✽
by
eastwitch2
03 Sep 2011
+1✽
All I can suggest to you is to add the shelf liner to your inner hoop and try again using 2 layers of the fibrous water soluble like you show in the picture.
I have to agree that this may be a design flaw and Miems needs to correct the digitizing of the design.
If I had this design I would try and stitch it out for you to see how it would work for me on my D1 with Rayon thread.
These are very pretty and it is such a shame that this is happening.
EastWitch2
I have to agree that this may be a design flaw and Miems needs to correct the digitizing of the design.
If I had this design I would try and stitch it out for you to see how it would work for me on my D1 with Rayon thread.
These are very pretty and it is such a shame that this is happening.
EastWitch2
7969✽
by
eastwitch2
03 Sep 2011
+1✽
One more comment
Always Use Sharp point embroidery needles for FSL, not ball point needles.
Size 75/11 or 80/12 work best for lace.
EastWitch2
Always Use Sharp point embroidery needles for FSL, not ball point needles.
Size 75/11 or 80/12 work best for lace.
EastWitch2
211088✽