Community / Embroidery /
17161
by bikermomfl 19 Nov 2011 ( edited Nov 23'11 14:51 )
+40

I'm in need of a little advice. My iron died recently so I trotted up to the handy Walmart to get a new one, I bought a 'sharp' in the average price range. What a dud! It will only steam once in a while, not continuous. Does anybody know of a nice iron that produces lots of steam? Don't really know where to look..........:(

Comments (19)
22354
by sewfrenzie 19 Nov 2011
+4
Good luck! I have yet to find a nice iron that is afforable these days. They just don't make things the way they used too. I have a spritz bottle of water next to my iron and use that when I need to. I've given up on finding a good iron I can afford.
3562
by thecraftycritter 19 Nov 2011
+5
I'm with sewfrenzie on this one. Unless you pay an arm and a leg for one they don't work at all. If I spend over $100 on something it surely won't be an iron. Spritz bottle ares cheap and even the cheapest of irons heat up.
85867
by katydid 19 Nov 2011
+3
After I bought my first Rowenta, I was in love!!! I have had several. I don't buy the most expensive model. I do like the stainless steel bottom one. My sweetie was pressing something at my house once and he fell in love with it too. He bought one for himself and both of his children. I did notice that they are made in China now, like every thing else. Kay
26714
by mary51 19 Nov 2011
+3
I have a Rowenta, for quite sometime and I like it very much, made in Germany!!!
8230
by rachap 19 Nov 2011
+3
If you have a Home Depot near you, go have a look at theirs. I bought one a couple of years ago for about $15. and it has been the best iron I have had in quite some time. and i have had Rowenta and Bernina. I can't tell you the brand as I am not at home but it was not one of the usual iron brands.
57801
by edithfarminer 19 Nov 2011
+3
I always buy the cheapest but with a good seperate water tank, so I get heaps of steam. Love those irons. Used to buy the expensive ones, but find the cheap ones just as good.Hope you can bring the other back if you complain. Good luck
158718
by jrob 19 Nov 2011
+5
I buy my Rowenta's at Sears. You can also get them online, but buy the one still made in Germany, NOT the one from China - they leak. Or at least the 3 I've sent back did.
4 comments
by katydid 22 Nov 2011
I did not know you could still get the German mfg one. next time , I will check Sears out!!
by jrob 22 Nov 2011
http://www.amazon.com/Rowenta-DW8080-400-Hole-Stainless-Soleplate/dp/B00305H9U6
You can also buy it on line here.
by jrob 22 Nov 2011
DW8080-400-Hole-Stainless-Soleplate/dp/B00305H9U6
by jrob 22 Nov 2011
I had to do it 2x to get the correct IP address, just don't duplicate the DW8 at the end of the first one.
619
by sukicorky 19 Nov 2011
+4
I bought a Black & Decker about 10 years ago. It has an automatic shut off and lots of steam. I could swear it gets better with age. I love it!
Rachel
2 comments
by justonlyme 22 Nov 2011
I have a newer Black and Decker. It is horrible. I wouldn't recommend mine to anyone. Enjoy your old one while it lasts!!
by sewfrenzie 23 Nov 2011
10 years ago black and decker had good prducts, as of late though their products leave a lot to be desired. So sad to see the quality of products change so much!
78119
by lidiad 19 Nov 2011
+1
A few years ago I bought a Philips Azur Excel Plus, with the Anodilium plate. I'm still in love with this iron and it still looks new! It has been made in Singapore.
24961
by lflanders 19 Nov 2011
+3
I have a Rowenta in my craft room and another one in my walk-in closet(alot of room). Just me but I would not use anything else! I wish I could afford a new Rowenta Steam buggy but that is no longer in my budget since I had to retire because of my health! The first one I had was not a Rowenta and it worked wonderful...when it worked! I sent it back to the factory to have it fixed with the warrenty but it did not last another 6 months. I am sure that if it had been a Rowenta that I would have forced them to replace it! The steam buggy was one I got from HSN yrs ago.There is no substitute for good quality products! Maybe one day I will be able to afford another steam generator made by Rowenta!
1 comment
by katydid 22 Nov 2011
I am aslo sold on Rowenta!!! I love them!!!
85867
by katydid 22 Nov 2011
+1
You got lots of good ideas!
255054
by airyfairy 22 Nov 2011
+1
First of all I would take that one back. I had to buy a new iron last week. I have tried many makes in the past but the only make I buy now is Phillips. Good luck in your quest for a new iron. Sarah.
15982
by theduchess 22 Nov 2011
+1
Just got a TEENY one at Target for $9.99, fits your palm of the hand, this will be for quilting class.. Used it at quilt class. Works as good as my big ROWENTA, which is my regular iron.
20173
by lindalee757 23 Nov 2011
+2
I just had to go buy a new one this morning-mine took a nose dive off my ironing board the other day and decided it was only going to work for 5 minutes more then died. I bought a Shark at Walmart.
1 comment
by bikermomfl 23 Nov 2011
yuk that's what I did, hope you have better luck with yours...
10191
by nanniesara 23 Nov 2011
+1
Take it back and get your money back. They will take it back for sure. Rowenta is a good one.
15982
by theduchess 23 Nov 2011
+1
I saw that several ladies in my quilting class have this one:
Reliable V50 ORANGE Digital Velocity Steam Home Iron
They all swear by it. But it's about $100.00.
The teeny iron I just bought at Target has steam capability and was only $9.99 and is even used by Nancy (has quilting show on tv)just can't recall her last name..
35675
by gerryb 23 Nov 2011
+2
I got an off brand iron at Walgreens for $9.99 & it's great! They are on sale a lot, so check the Sun. ads. I think I had to send in a rebate form, but it came out to about 9.99. At that price, I figured if it died, I could get another. But it's still going & I like how it works.
20173
by lindalee757 23 Nov 2011
+1
the shark I bought is called the professional-2X burst steam power- works great! Lotsa steam-which is important to me-
Is this the same one that you bought? I think I paid $40 for it-
1 comment
by bikermomfl 23 Nov 2011
yep same one, but only has sporatic steam, one of those things that make me go grrrrrr
173695
by cfidl 23 Nov 2011
0
My Black and Decker has been dropped a few times and still works! The bottom is a little off! Anyway I love it! Live Laugh Download Stitch!