5218✽
Can somebody help me with the 3 position hoop for the Brother Innov-is machine. Is this what is know as a "megga hoop"?
I have been given one and I'm not sure where to find suitable designs I can use with it.
Thanks.
Comments (6)
145305✽
Maga hoop is usually the term for the largest of the 3-position hoops. I have a 100x170 mm hoop for my Brother 190D which is not mega at all, but needs special (or split) designs and I have a few Brother cards that have just those and I can split others (which I don't do as I have a machine with a much larger embroidery area.
Is there anything in your manual (under optional accessories)? Is the Brother site any help?
Is there anything in your manual (under optional accessories)? Is the Brother site any help?
1 comment
Thanksa for thaking the time to answer.
Nothing in the manual but I'll look on the Brother site later. I did try before but couldn't find anything. *
Nothing in the manual but I'll look on the Brother site later. I did try before but couldn't find anything. *
20463✽
my brother came with a large hoop only good for multi hooping - the stitch area of my inovis is limited to 5 x 7 .
the big hoop 5 x 12 can be placed in 3 possitions
(up middle down) to do "spitted" designs which are bigger than 5 x 7 - still have to figure out how but am doing research and will post when i did.
perhaps MOPS big droilly design can be splitt, will ask her.
the big hoop 5 x 12 can be placed in 3 possitions
(up middle down) to do "spitted" designs which are bigger than 5 x 7 - still have to figure out how but am doing research and will post when i did.
perhaps MOPS big droilly design can be splitt, will ask her.
1 comment
Mine is also 5 x 7. I'll keep a lookout for your findings and I'll post anything useful I find. *
27028✽
by
cherylgauteng
30 Dec 2011
+1✽
Why don't you just use their website or Google it. Sure there is info out there.
1 comment
How stupid of me not to think of that! The web is a wonderful place, everything is available with a little patience. Thanks for reminding me. *
6339✽
by
elizabethak
01 Jan 2012
+1✽
I've bought a Bernina Mega Hoop and have only used it once so far - to put wording down the back of a stole. It is designed to slide into three positions and thereby allowing you to do longer designs. The hoop is 44/150. Not much help is it? I need to go for lessons!
Happy hunting
Elizabeth
Happy hunting
Elizabeth
1 comment
Mine has the three positions and I would like to do a large design down the back of a denim shirt, just can't find one suitable for the hoop. I'll keep looking. *
26714✽
Good request! i bought that hoop and I have not used it at all, read instructions, and do not get them, I am a visual learner, where can we find a video for this hoop? Thanks
1 comment
If I find any info: I'll post it in Community. Meanwhile, good luck! *
10013✽
You could try You tube and search machine embroidery. The Flying Needle has lessons on splitting designs http://www.flyingneedle.ca/
2 comments
Sorry, I accidently hit submit. Kathy at the flying needle has lessons and tutorials for free and purchase where you may be able to get some help and info. You will need embroidery software to split designs.
Lori
Lori
Thanks, I'll try the Flying Needle and I never even thought of You Tube, but I'll try them too. *