29801✽
It is 2am here - can't sleep. Another problem I also had tonight. My 5 x 7 hoop seems to be stretching. No matter how tight I can get it the design always seems to pull in the middle and lines don't always match up. Have you ever wound tape on one of the pieces of the hoop to tighten it in the middle of the 7 like you do with Cross Stitch hoops??
Comments (14)
173695✽
Tape or a strip of fabric around that area. Hope you get good rest! Live Laugh Download Stitch!
1 comment
Thank for your suggestion.
122864✽
My local machine store wraps that non-stick rubber matting around their hoops, she said she never has registration problems since she's been doing it.
My Elna hoops have silicon built into them and I never have problems with slipping like I do sometimes with the Husqvarna hoops.
hugs n roses, Meganne
My Elna hoops have silicon built into them and I never have problems with slipping like I do sometimes with the Husqvarna hoops.
hugs n roses, Meganne
1 comment
I have some of this so will certainly give it a try. Thanks.
70767✽
I purchased a product called Hoop Tape.. you put it around the edges of your hoops.. it keeps thing really tight.. look it up.. it is very reasonable..
1 comment
Sounds like a Great suggestion. Thanks.
21543✽
by
susiesembroidery
28 Jan 2012
+8✽
I sometimes use a thick piece of stabilizer which I cut to the hoop size and then hoop it with the material on top of the material so that you have the inside upen for embroidery. Cut out the centre part. Lovies.***
1 comment
Thank You. Might give this a try.
32948✽
by
jofrog2000
28 Jan 2012
+7✽
I went to a class with a Floriani rep, and she used the thinner knobby shelf liner, cut a rectangle that is about 2" bigger than the hoop, use the double stick tape to adhere it to the bottom of the inside hoop. Then cut a rectangle out of the center, leaving about an inch of the liner. This will make it tighter on all sides. Viking used to sell something like that long ago. She has it on all her hoops.
I usually use a strip of paper towel, or lightweight interfacing and lay it on the material, just under the inner hoop as I hoop up. Either way, there it is tighter. And, lastly, you can use straight pins right at tht top, perpendicular to the hoop, so the material cannot pull back in the hoop.
Jo
I usually use a strip of paper towel, or lightweight interfacing and lay it on the material, just under the inner hoop as I hoop up. Either way, there it is tighter. And, lastly, you can use straight pins right at tht top, perpendicular to the hoop, so the material cannot pull back in the hoop.
Jo
3 comments
i did go to Floriani class and i do use the shelf liner works
This works!
Thank You for your suggestions.
238✽
by
dianebeggs
28 Jan 2012
+8✽
I use self ahearing badage, it the bandage wrap that sticks to itself. you can get in the drug stores. Then just wrap it aroun the inner hoop. This way it not sticky and can be removed without problem good luck
1 comment
Thank You for the ideas.
15256✽
Since wrapping my inner hoop with elastic thread, Ive had no stretching. Hoops much tighter now. :)
1 comment
Thanks I have many things to try now.
17214✽
5a.m. here, warm and sultry. I have made a frame of ordinary quilt batting and found that worked well but I think a frame of thin non-slip matting would be better.
There are some great ideas here.
AlmaG.
There are some great ideas here.
AlmaG.
1 comment
Thanks Alma. You can't sleep either. Hot yesterday for My Gambier. I had about 3.5 hrs sleep.
6340✽
by
marcellelewis
28 Jan 2012
+8✽
You might try using some sticky backing on your fabric so nothing moves. The athletic tape that sticks to itself is good to use on the hoops. I also have some squares to fit some hoops made from the shelf lining.
Is it possible you are hooping too tight for the fabric you are using? I have been there myself on occasion. Thinking I needed the fabric tighter when actually I needed to loosen it a bit.
Another flower for you today.
Marcelle
Is it possible you are hooping too tight for the fabric you are using? I have been there myself on occasion. Thinking I needed the fabric tighter when actually I needed to loosen it a bit.
Another flower for you today.
Marcelle
1 links:
[1]
http://embroidery.gotop100.com/
embroidery.gotop100.com
2 comments
I was doing FSL on WWS.
My sister had a problem with FSL like that but it turned out she needed to use a smaller hoop. I use 2 layers of heavy weight badgemaster for my FSL designs.
Marcelle
Marcelle
145305✽
I've used bias tape wound around the sides, and shelf liner and felt cut a bit bigger than the hoop with a hole just a bit bigger than the embroidery area cut out - Viking sells something like that as hoop help.
All three work well.
I have, however, once sewn a bit of the shelf liner into an embroidery, just carelessness.
All three work well.
I have, however, once sewn a bit of the shelf liner into an embroidery, just carelessness.
1 comment
Some great suggestions. Must try some of these. Thanks.
743327✽
you have several answers here already. And yes you are not the only one with this problem! When I use my largest hope I have same problem. When it's no problem with the material , I sometimes place pins in the material just where the material comes out of the hope again.To prevent it will be pulled in.The pins come against the border of the hope to fixate . Ans sometimes I place sticky stitch and tear away in the hope and place the material on it. But you cannot always use that. that depends of the project. But the biggest hope causes me this troubles lots of times too. Hugs gerry
19430✽
by
fannyfurkin
29 Jan 2012
+1✽
On my 300mm x 200mm (about 12x8) hoops I just have masking tape wound around the middle of the long edges, this seems to do the trick for me. I am hooping so many items in a day I don't have time to fiddle to much.
Alice.
Alice.
26316✽
by
juanitadenney
29 Jan 2012
+2✽
Well, it's 4:00 A. M. at my house and since I'm a night owl it is my bedtime now but I'm glad you asked this question as I've learned a lot from reading all these ladies answers. Some of my friends wrap there hoops with some kind of tape from the medical supply store which I'm going to look into now that I have bought the Diamond from Viking that has the big hoops. Good night!
64451✽
When I purchased my new Ruby last year, my instructor told me she seldom hoops anything and so that is what I do. I hoop only my stablizer and a spot of glue to hold my fabric in place. This keeps my hoops in good condition and avoids there becoming loose,
hugs
Michelle
hugs
Michelle