I run mine FULL BORE open. ;)

I usually run mine at full speed also. However if I have an especially dense or heavy design I slow it down.

I run mine now at full speed. When I brought my new Baby Lock Elissimo in to be checked out, because I was having problems from day one, it came back with the settings back to full speed. Until then I had run it at a lower speed. She is now running with no problems at top speed. I have to admit that it sounds scary at time.

It depends on if the moon is aligned with Mars or Jupiter. My obsevation is that on my machine, the faster the speed the more tension is put on the thread. When I cut the thread and the thread "twangs," I know I'm going to get puckers. The slower speeds allow the thread to relax a bit and not make the stitches so tight which results in fewer puckers. You would think that just changing the thread tension would take the stress off the thread at higher speeds, but it doesn't. All it does is cause loops. If I'm using metallics I slow the machine way down. I think there are some threads out there that are designed for high speed machines that are polyester, but I don't have any. Also, if I do have a problem (like that never happens) of any sort, going slower gives me more time to stop the machine and fix the problem!

I'm sure other people stitch at the highest speed all the time. With my machine, my skill, and my threads, I'm just not one of them.

Hi Tammy, it depends what I am stitching. FSL(lace) always at slow, Metallic thread slow, small letters slow. Most other things at full blast.
You must hear it at full blast when I have both of my machines running together. haha

Hugs Yvonne

my slowest is 600 rpm upto 1000 rpm.. I prefer the 600 rpm a litte quieter and more reliable, less thread breakage etc..
big hugs from London - Maria xx

Just depends on what I am doing,Lace or Metallic and some dense designs 600,faster for sewing and other work.

Both my machines run at full speed ahead!! Only for lace and metallic do I put the Superba at 3/4 tension. Very little, if any breakages. It knows I am an impatient lady,hehehe.

Run mine on high (like myself lol) but for thick designs or some kind of threads i slow it down hugs Carolyn

I used to work flat out but somehow now I have slowed my machines down and take longer to sew out now. Like Maria I usually work at 600 rpm than the 1000.

I always start out on the slowest speed when just beginning ANY design; just to make sure everything is working correctly. Then I usually go to full speed, unless design is very dense, then I go to half speed. On lace I use half speed. I don't know if this is what you're supposed to do but it works for me!

I always run my at a slower speed and seldom if ever have any problems. Since i am in the elder stages of life lol I have slowed down and find it a lot easier to keep up with everything I am doing if my machine's mode matches mine. Seriously, seldom do I ever have any thread problems and I am on my machine everyday unless I am out of town and that is seldom. For the past 2 yrs. I have it serviced about every 6 months because I do sew or embroidery all the time and it runs like a top./Lillian

Flat out, unless I am using metallic thread, then I will slow it down only if I am having problems. But that is me, everything has to happen 5 minutes ago. I am surprised I can refrain from putting my clothes on whilst still in the shower.

Wow, I don't know about RPMs, but I think I have 4 speeds and I usually run the machine one notch down. Metallic, I slow way down. We discussed this several years ago and some one asked me if this does not defeat the purpose of having a faster machine. I guess it does, but I prefer going slower. Kay

I run mine at the slowest speed. For some things I will go at medium (like a big area of fill, etc.) but I find I like the output better at a slower speed. Mine has 350, 600, and 1000. Yes it takes longer to stitch a design but, to me, it is worth it.

The dealer of my machine said that they run better at the faster speed.

I run mine on slow speed, relax, and enjoy the stitchout, without the thread breakage, etc.!!
Hugs, Angel

run my fast unless the thread breaks.

I have a brother galaxie 2100 and I don't seem to have any control over the speed whislt embroidering. The machine does vary in speeds while it is emb a design though so it must decide itself.