Community / Embroidery /
255054
by airyfairy 06 Mar 2013 ( edited Mar 13'13 05:52 )
+28

I have been thinking of trying a bit of stippling on tissue cases etc. What do I use as backing to make the stippling look raised? Thank you. Sarah.

Comments (8)
67271
by bevintex 06 Mar 2013
+6
I use a light batting between layers. Makes it stand out.
Bev
140717
by spendlove 06 Mar 2013
+7
I use a sandwich of wadding between old polycotton sheeting and my top fabric. This avoids the stiffness of stabiliser in the finished product as well.
111390
by sdrise 06 Mar 2013
+6
Use a little batting on the back before you sew it. Suzanne
360671
by noah 07 Mar 2013
+5
I use bat between whatever the fabric is i am going to stipple on !!
16529
by vickiannette 07 Mar 2013
+3
For a more 'raised' look, use nice soft wadding. Test different thickness to find your desired look. Also try using wool or cotton or poly fibre to see what you like. What you end up using, will depend upon what the article is used for.
1 comment
by vickiannette 07 Mar 2013
sorry didn't read carefully enough. For a tissue box, you will probably use a thin man-made product.
255054
by airyfairy 09 Mar 2013
+2
So sorry I have only come back to my post now. Thank you ladies for your help. This is now in my 'to do' list. Sarah.
173695
by cfidl 12 Mar 2013
+2
I used a high loft polyester batting (used for quilts) for the clutch purse, and it turned out great, Low loft will give some raised, cotton none really. Remember Katulle's Christmas trees. that was high loft with larger areas between parallel stitches. So a stipple will not be so raised since the areas are smaller. I have not tried a looser polyester batting. That might give you even more texture since it will not be even height, Also if the topping is slippery, you may want to consider ways to secure it. I do a wet stabilizer "liquid goo" (vilene) for satin. Then stabilize as usual.
59631
by hightechgrammy 13 Mar 2013
+1
Hi Sarah, I was so afraid of stippling and now I absolutely love it! The main thing I have learned is to watch how thick your corners are, if the corners are too thick, you will have a hard time making them turn out nice and crisp. However thick you make your sides, see if you can have the batting end (on the inside) just before you get to the seam and especially where you join at the corners. It will make all the difference. I love using batting and a stiff stabilizer for bags, you may want to experiment first. Have fun!
1 comment
by airyfairy 13 Mar 2013
Thank you Jan.