299559✽
when you embroider a design like a turtle on a bib that is to small for your hoop what kind of stabilizer should I use ? I know that I need to baste the bib first but not sure about the stabilizer since I normally stitch on homemade bibs then cut it out.
Comments (6)
33641✽
Would a sticky stabilizer work for you?
1 comment
I don't really use that if I can help it...........thanks anyway Penny I am hoping there is another way. I have hooped wss fibrous but am thinking that might not be right either?
18104✽
Love the viliene sticky back for projects like these. If you peel the sticky back and attach it to the inner frame as demonstrated by Sonia Showalter in her tutorials you will have a great stitch out. As long as the digitizing is well done.
2 comments
sorry same as below & if there is another way I would rather try that. I find it gets hard to pull off & this is just a less expensive bib so might distort the shape of it when I pull it off
but thank you just the same
299559✽
I was going to use wss fibrous stabilizer but I realize that it will wash away & then there will be nothing to keep it stabilized? Tear away or leave in?
1 comment
Maybe a tear away with a little 505 on it. They make several weights of it.
318555✽
by
dragonflyer
22 Jan 2015
+3✽
Hi Lor...I would use a soft tear-away...
1 comment
thanks Kim I have used my baby soft Sulky tear away
535✽
You might try Sheer magic from Jenny Haskins . it is a fusible sheer support. It can be used to cover the stitches to protect sensitive skin also. You could also make a patch then attach it. Good luck.
1 comment
thanks I have used my baby soft Sulky tear away
158718✽
I just always hoop tear-away and temporary adhesive spray to hold in place and I still put a couple of pins in because I'm so compulsive. :)
1 comment
thanks Jerrilyn I have used my baby soft Sulky tear away